The Paris joiner who drew the workbench woodworkers still build today
A working joiner drew his own bench in 1769. Woodworkers still copy it.

Most old books about crafts were written by gentlemen who watched other people work. L'Art du menuisier is different. Its author, André Jacob Roubo, was a joiner himself, trained in the trade and working at it. Lost Art Press, which has spent years translating him into English, notes that he drew almost all of the book's illustrations with his own hand, and that he went to craftsmen of other trades to learn how they did things.
The book came out in Paris between 1769 and 1775. It covers furniture making, carpentry, marquetry, carriage building and even garden structures. Hundreds of engraved plates show tools, joints and men at work.
How it was built
One plate made Roubo famous with today's woodworkers. Plate 11 shows the inside of a joiner's shop and, below it, his workbench. Roubo describes a top made from one sturdy plank, 5 to 6 inches thick, 20 to 25 inches wide and 6 to 12 feet long. It was usually beech, sometimes elm. The legs were hard, stiff oak, 6 inches wide and 3 or 4 inches thick.

The height of the workbench is ordinarily 30 inches but because workmen are not all of the same height...
André Jacob Roubo, in the Lost Art Press translation
There is no fancy vise in the drawing. A planing stop sticks up at one end, and work is held down by holdfasts: bent iron bars that drop into holes bored through the top. Roubo wanted the shanks 18 to 20 and even 24 inches long. Popular Woodworking points out that the thick slab has no aprons around it, so you can clamp anything anywhere. That is why so many modern benches are called Roubo benches.
What it teaches a weekend woodworker

The holdfast is the cheapest helper in a workshop. Bore a hole through a thick bench top, drop the holdfast in and tap its head with a mallet. The bar tilts in the hole and pins your board flat. A tap on the back of the head lets it go. Try it on a scrap first, and put a thin piece of wood under the pad so it does not mark your work.
You do not need a 12 foot beech plank to start. A short, heavy bench that does not wobble will change how every other project goes. Build one this weekend, bore a few holes, and work the way Roubo's joiners did.
Want to build something with your own hands this weekend? Start with a good plan.
Get 50 step-by-step woodworking plans and “The Art of Woodworking”, a 440-page guide book, free.
Get 50 free plans + the 440-page guide bookSources
- Fine Woodworking: https://www.finewoodworking.com/2024/10/03/throwback-18th-century-workbench
- Popular Woodworking: https://www.popularwoodworking.com/projects/the-return-of-roubo/
- Lost Art Press: https://blog.lostartpress.com/2008/06/07/andre-j-roubo-translation-of-%E2%80%9Cl%E2%80%99art-du-menuisier%E2%80%9D